Hitachi Compound Mitre Saw Manual

The Hitachi Compound Mitre Saw is a powerful tool designed for precision cutting of wood and other materials. It features a robust motor, adjustable angles, and a laser guide for accurate cuts. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Safety Information 3. Setup Instructions 4. Specifications 5. Operating Instructions 6. Maintenance 7. Troubleshooting 8. Warranty Information

Features at a Glance

Key features include a powerful motor, dual bevel capability, and a laser guide for precise cutting. The saw is designed for easy adjustments and has a sturdy base for stability.

Feature	Description
Powerful Motor	High-performance motor for efficient cutting
Dual Bevel	Allows for angled cuts in both directions
Laser Guide	Helps ensure accurate cuts
Adjustable Angles	Easy to set for various cutting needs
Sturdy Base	Provides stability during operation

Safety Information

Always wear safety goggles and ear protection when operating the saw. Ensure the work area is clean and free of obstructions.

Read the manual thoroughly before use.
Keep hands away from the cutting area.
Ensure the saw is unplugged when changing blades.
Use the appropriate blade for the material being cut.

WARNING! Failure to follow safety instructions may result in serious injury.

Setup Instructions

Unpack the saw and ensure all parts are included. Follow these steps to set up the saw:

Place the saw on a stable work surface.
Attach the dust bag to minimize debris.
Adjust the saw to the desired angle using the bevel adjustment.
Plug in the saw and ensure it is functioning properly.

CAUTION! Ensure the saw is securely mounted before use.

Specifications

Model: Hitachi Compound Mitre Saw
Power: 15 Amp motor
Blade Size: 10 inches
Bevel Capacity: 0° to 45° left and right
Weight: 35 lbs
Cutting Capacity: 2x8 at 90°, 2x6 at 45°
Laser Guide: Yes

Operating Instructions

To operate the saw, follow these steps:

Adjust the angle and height of the blade as needed.
Place the material securely against the fence.
Turn on the saw and allow the blade to reach full speed.
Lower the blade smoothly to make the cut.
Turn off the saw and wait for the blade to stop before removing the material.

WARNING! Always keep hands clear of the blade during operation.

Maintenance

Regular maintenance is essential for optimal performance:

Keep the saw clean and free of debris.
Check and replace the blade as needed.
Inspect electrical cords for damage.
Lubricate moving parts as recommended in the manual.

CAUTION! Always unplug the saw before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Saw does not start	Power supply issue	Check power cord and outlet
Blade not cutting	Dull blade	Replace with a sharp blade
Excessive vibration	Loose parts	Tighten all screws and bolts
Laser not working	Battery issue	Replace laser guide batteries

Service: For further assistance, contact customer support.